Ghost 2 Immobiliser Problems
The Ghost 2 immobiliser, designed to protect cars from key cloning or hacking, is a small device that can be installed without causing damage to your vehicle. It stops your vehicle from starting unless you press a specific sequence of buttons within your vehicle, similar to the password you enter on mobile phones.
Stop/Start
Ghost immobilisers prevent vehicles from being stolen by preventing the engine from running until it receives the right PIN code. This is accomplished without altering the vehicle, and is undetectable by thieves. The unit communicates with the ECU on the CAN data bus, which allows it to lock the vehicle. This system is like the one automobile manufacturers have used in their cars for years, however, the thief cannot add a new key or utilize key relay technology to bypass it as they can with factory fitted systems.
Ghost is compatible with all vehicles with an engine, which includes cars, vans, motorhomes, caravans, and bikes. The same system can be used on electric vehicles. It is an excellent alternative to locking the steering wheel and wheel clamps that can be installed with minimal effort.
When the Ghost is armed it will block all buttons in your car and stop the ignition from starting unless a PIN code has been entered first. This can be done via the Android or Apple mobile apps or by manually entering the code through your key fob. If a wrong code is entered, the app will display an indicator light and the Ghost will not allow the vehicle to be started again. This is a great way to deter thieves. If the vehicle can't be started the thieves will be able to move on.
The Ghost is a small, weatherproof device that can be tucked away in the most difficult to access parts of your vehicle. It is extremely easy to install and takes an average of 20-30 minutes per vehicle. It is also easy to take off if you decide to switch vehicles, or give it to an auto repair shop or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system, which is recognized by a few insurance companies. It also has an emergency security feature that is secured by Pin Code Override, and a Service/Valet mode that can be activated by pressing a button on the app or using your key fob.
Disarm
Ghost immobilisers are not mechanical devices to prevent theft that can be removed, are hidden in the car. Even if they were to be found and stolen, thieves would not be able to start the car. They are almost impossible to hack or bypass. A ghost immobiliser is able to prevent key cloning, as well as signal jamming and devices spoofing. These are the methods thieves use to gain access into cars that have standard immobilisers.
The immobiliser sends a code to the ECU. If a wrong code is sent and the vehicle is not started as the engine will not start up. It is possible to disable a ghost immobiliser by using an application program, but it is extremely time-consuming and difficult to accomplish this. Only an authorized installer is able to install and use the software.
The Ghost immobiliser is a small system that sits within the wiring loom of the vehicle and is inaccessible to the naked eye after it has been installed. It does not appear on diagnostic systems. There are no indicators with LEDs, and it doesn't communicate with the engine via the OBD port. It communicates silently through the CAN data loop.
The system won't allow the vehicle to start unless it is provided with an input PIN code that is entered by the user. This is entered through buttons on the steering wheel, door panels or centre console. This is a safer way to safeguard the car since it doesn't require the use of a remote or key fob.
Ghost also has a service-mode that can be turned on via the mobile application. This lets you give your keys to someone else for service or valet parking, without needing to enter an arm-disarm sequence.
No matter if your Ghost is in service mode or not, you should not attempt to remove the system yourself since it could impact the engine and cause damage. It is recommended to speak with a TASSA certified installer who will be able to remove the system in a safe and secure manner. Our newest GHOST II immobilisers also include the QR fingerprint stickers that is hidden in various locations of your vehicle. these are linked to our international security register. In car ghost immobiliser is removed and is sold on the black market, this will link it back to its original owner.
Anti-Hijack
The anti-hijack function is an essential feature of the Ghost Immobiliser 2. This is a clever key that guards your car from thieves. Whenever the ignition switch is turned to on and the vehicle is stationary for a period of 30 seconds then the Ghost system will automatically stall the engine and switch the hazard lights on. This allows the driver or passengers time to press a security button (depending on the vehicle) before the system is activated and the engine is again allowed to begin.
In contrast to other systems that simply stop the engine when the ignition switch is turned on, the Ghost system uses a special controller and timer unit that will close the valve that cuts off fuel if it is activated after a set period of time, even in the event that the ignition is switched on! The delay time interval needs to be long enough to allow the victim of the vehicle to drive away from the scene of the hijacking and a sufficient distance from the stalled vehicle before the system can be activated.
In addition to the standard CANbus immobiliser blocking features of the Ghost, it has an additional security level that blocks common methods of hacking used to gain access to modern vehicles, such as relay attacks keys range extending, relay attacks and ECU swapping. The Ghost system communicates in a silent way and does not emit signals that could be snatched by thieves with codes-grabbing or RF scanning technology.
The Ghost system also comes with the option of a Service/Valet mode that allows your vehicle to be temporarily re-started and driven without the need for PIN codes. This is a great option when you park your vehicle and only need to leave it for a brief time for a few minutes, like to open the garage door or put groceries in the boot. The system will end the service mode based upon speed and time or through an easy PIN code input process. This gives you total assurance that only you are able to drive your vehicle!
Keyless Entry
Many consumers are now seeking additional security measures because of the growing trend of contactless car theft. This is particularly true for those who invested time and money to customise their vehicle or own rare/expensive cars. A supplementary immobiliser is a cost-effective way to prevent this kind of theft since it will stop your vehicle from starting unless the correct pin code is entered on your key fob.
Immobilisers are designed for a variety vehicle circuits including those which control starter motors and fuel pumps. They also can shut off the car alarm in order to draw attention and scare off any potential thieves.
These devices connect directly to the engine control unit via the CAN data network and prevent the thief from bypassing it by installing a new ECU or by using key programmers. The immobilisers are fitted discreetly and leave no marks in your vehicle. They are also unnoticeable by sophisticated tools used by thieves.
The Ghost immobiliser differs from other systems that require the driver to carry an app or tag. Instead, you can choose your personal pin sequence by pressing a pattern on your steering wheel, door panel, and centre console. The pin can be easily changed to make the device as secure as a credit card. It is also more difficult to crack because it requires up to 20 presses.
Ghost also offers Valet/Service mode, which permits you to deactivate it if you are going to surrender your vehicle to valet parking, or service. This allows the system to operate within the parameters like a 30-mph speed limit. It is then reactivated by using the original key or key that corresponds to the entry code.
This makes it the most effective and secure aftermarket CAN-based immobiliser on the market, and is insurance-approved by Thatcham as an optional accessory for your car when installed by one of our accredited installers. The Ghost 2 immobiliser is also equipped with six QR fingerprint labels as well as an ISR contact card with your unique QR code as well as a secure emergency code, all of which you keep in the wallet/purse of your vehicle.